Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| C2463 | RHEINMETALL SOLDIER ELECTRONICS GMBH |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAPN | SECTION QUANTITY | 1 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ADAQ | BODY LENGTH | 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 9000.0 NOMINAL |
| ABMK | OVERALL WIDTH | 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 25.0 KILOHMS SINGLE SECTION |
| ABWV | SHAFT DIAMETER | 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ABXF | SHAFT LENGTH | 0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABJT | TERMINAL LENGTH | 0.285 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL |
| ADAT | BODY WIDTH | 0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.100 INCHES NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| ABHP | OVERALL LENGTH | 0.695 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AKPV | MOUNTING FACILITY QUANTITY | 1 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |